C-SX-175 - Right Angle PCB Bulkhead Mounted Connector
C-SX-175 - Right Angle PCB Bulkhead Mounted Connector  C-SX-175 - Right Angle PCB Bulkhead Mounted Connector 

Electrical
Impedance 75Ω
Frequency Range 0 - 6GHz
Working Voltage 250Vrms
Dielectric Withstanding Voltage 750Vrms
Reflection Factor (VSWR) 1.11 (max) DC - 3.0GHz 1.29 (max) 3.0 - 6.0GHz
Contact Resistance Centre contact 4.0mΩ Outer contact 2.5mΩ
Insulation Resistance >1000MΩ
Material
Metal Parts Brass / Ni
Centre Pin BeCu / 10µ"Au
Insulators PTFE
Environmental
Temperature Range -65 to +85°C
Mechanical
Mating Cycles 500
Processing
Processing Maximum wave and hand soldering temperature 265°C
General Information
Mounting Type Right Angled
Leg Length 2.6mm
Hardware Supplied with 2 slot circular nut

C-SX-175 - Right Angle PCB Bulkhead Mounted Connector

  • Product Code: C-SX-175


The C-SX-175 is a right angle PCB bulkhead mounted connector which conforms to the standard of SMPTE ST 2081-1,  allowing bit-rates of 5.94Gbit/s over a single coaxial connection. The 8mm pitch  and low profile of the connector enables double wiring densities and is optimised for use in 6G HD-SDI applications. The C-SX-175 is supplied with a 1.8mm deep M5 nut.

 


    C-SX-175 - Right Angle PCB Bulkhead Mounted Connector

Related Products

C-SX-113GN - Right Angle PCB Bulkhead Mounted Connector

C-SX-113GN - Right Angle PCB Bulkhead Mounted Connector

C-SX-149 - Right Angle DIN 1.0/2.3 Bulkhead Connector (Long Body)

C-SX-149 - Right Angle DIN 1.0/2.3 Bulkhead Connector (Long Body)

C-SX-187GN - Right Angle DIN 1.0/2.3 Bulkhead Mounted Connector

C-SX-187GN - Right Angle DIN 1.0/2.3 Bulkhead Mounted Connector

TLG108 - DIN 1.0/2.3 Slotted Nut Driver

TLG108 - DIN 1.0/2.3 Slotted Nut Driver

Tags: 6GHz, Right Angled, DIN 1.0/2.3,