The PCHS is a cable system housing for connectors with C, D or R body types.
The DIN 41612 R type body offers a choice of nine contact arrangements over 3 rows. It has an overall width of 90mm and is only available in a reversed male connector.
This is a PCB mounted connector and is available in a right angle mounted version for boards up to 1.6mm thick;. Two straight solder tail options for boards up to 1.6mm or 2.4mm in thickness, with the 2.4mm thickness also being suitable for press-fit between 1.5mm and 4.0mm in thickness. Three lengths of wire wrap tail style are also available.
Each DIN 41612 connector is offered with a number of different contact and termination finishes.
| Contact Resistance | ≤20mΩ |
| Insulation Resistance | ≥10 6 MΩ |
| Connector Type | Male |
| Current Rating | 1.5A at 20°C 1A at 80°C 0.75A at 100°C |
| Proof Voltage | Contact / Contact 1000Vrms Contact / Test Panel 1550Vrms |
| Connector Body | Glass Fibre Filled Polyester |
| Male Contact | Copper Alloy |
| Female Contactl | Phosphor Bronze |
| Contact Plating | Ni / Au Ni / PdNi / Au |
| Temperature Range | -55 to +125°C |
| Flammability | UL 94 V-O |
| Insertion Force | 32 pole ≤30N 64 pole ≤60N 96 pole ≤90N |
| Retention Force | ≥0.15N / Contact Pair |
The PCHS is a cable system housing for connectors with C, D or R body types.
The PCHI is a polycarbonate housing for C and R body style DIN 41612 connectors.
It is available in 4 different specifications to suit your application:
PCHI – Housing for C-female IDC, solder and wire wrap types and R-male;
PCHL – Housing for C-male and R-female;
PCHLS – Whole set consisting of two pieces of PCHL and the required screws and cable tie;
The PCKT is a guide frame for use with the PCHS cable housing.
The PCKL is a guide frame for use with the PCHS cable housing.